EasyManua.ls Logo

Silvercrest SL 80/2 100CI - Page 9

Silvercrest SL 80/2 100CI
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 6 -
Ensure that the power source (socket) is easily accessible.
Do not bend or crimp the power cord.
If the power cord is damaged, have an expert repair the
receiver before you reuse it. Otherwise, there is a risk of electric shock.
Never allow children to operate the receiver or to play with the antenna unit
unless supervised. Children cannot always correctly perceive possible
dangers.
Always leave service jobs to qualified technicians, otherwise you will put
yourself and others in danger.
Disconnect the receiver from the power source in case of operational
disruptions.
Spare parts must be ordered directly from the manufacturer
Modifications to the device will nullify the manufacturer’s liability.
Remove all protective coverings before putting the device in operation.
Keep all packing materials (foils etc) away from children. They involve
danger of suffocation.
Suitable location
Place the receiver on a stable and even base.
Never place receptacles filled with liquid (e. g. vases) on or next to the
receiver.
Avoid direct sunlight and places with an extremely high amount of dust.
Never cover ventilation slits. Ensure adequate ventilation of the receiver.
Do not place any heavy objects on the receiver.
Humidity may settle in the receiver if it is brought into hot surroundings from
the cold. In such an event, wait for about an hour before operating the
equipment.
Lay the mains and antenna cables in such a manner that no-one steps or
trips over them.
Avoid proximity to:
heat sources, such as heaters,
naked flames, such as candles,
devices with strong magnetic fields, such as loudspeakers.

Table of Contents

Related product manuals