Safety instructions
7
Safety instructions
Please read the safety instructions carefully before
operating the receiver.
Please follow all warnings and instructions on the
equipment and in the operating manual.
Basic safety instructions
Electrical connection
• Separate the receiver from the power source in case of
operational disruptions. Please note: The receiver will
remain live, even if it is turned off with the mains switch
on the rear side.
• Do not expose the receiver to rain or any kind of
humidity to avoid risk of fire and electric shock.
• Never open the casing. Otherwise, there is a risk of
electric shock.
• Connect the receiver only to a professionally installed
mains socket of 100-140V ~, 50-60Hz.
• Pull out the mains plug from the socket if the
equipment is not in use for a longer period of time.
Only pull at the mains plug, not at the cable.
• In case of storms pull out the mains plug of the
receiver and the antenna plug (if any) of the roof
antenna from the socket.
• If foreign bodies or fluids enter the receiver,
immediately pull out the mains plug from the socket.
Ask a qualified person to check the equipment before
operating it again. Otherwise, there is a risk of electric
shock.
To Next Page
Loading...
Need help?
General
