Operation
37
Installation (symbol: Antenna)
• Auto scan
The easiest way to install your channels. In the menu
item "Scan mode" select free or complete channel
range. Initiate the scanning procedure via menu item
"Scan“.
Caution!
With this procedure, all previously saved channels will
be deleted and all channels found will be saved.
• Channel Scan
In this mode, you can scan for specific channels, if
you know the broadcasting channel or the frequency.
Initiate the scanning procedure via "Scan“.
• Channel Setup (only for experts!)
If you wish to make manual changes for the channels
found, select the desired channel and press the OK
key.
• Aerial Adjustment
o Ch No.
Here you can check the signal strength and quality
at your location. For this purpose, select individual
channels by pressing the V- / V+ keys and check
their values.
To Next Page
Loading...
Need help?
General
