EasyManuals Logo

Silvercrest SL35T User Manual

Silvercrest SL35T
65 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #55 background imageLoading...
Page #55 background image
Tips & tricks/trouble shooting
51
Tips & tricks/trouble shooting
Symptom Possible cause and remedy
Frontal display
dark
The power cable is not connected.
Connect the power cable with the power
source.
The antenna has not been directed correctly.
Direct the antenna properly.
No or only weak signal.
Check the cable connection from the antenna
to the receiver and from the receiver to the
connected equipment.
Direct the antenna.
No sound or
image, image
colour is week,
but receiver
menus are
displayed
Set the correct video format at the receiver.
The system is not connected properly.
Check connection of the SCART cable
The green LED is
lit.
The TV set does
not display any
image.
The TV set is not in AV mode.
Switch the TV set to the respective AV input.
The antenna has not been directed precisely.
Direct the antenna more precisely. For this
purpose, press the “Info” key of the remote
control twice. The signal strength will be
displayed for directing the antenna properly.
Poor image,
blocking error,
formation of small
blocks, sound
stops
The antenna is defective. Replace antenna.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Silvercrest SL35T and is the answer not in the manual?

Silvercrest SL35T Specifications

General IconGeneral
BrandSilvercrest
ModelSL35T
CategoryReceiver
LanguageEnglish

Related product manuals