Connecting the receiver
24
Connection of an audio-digital receiver
If you want to use 5-channel audio transmission (Dolby
digital sound/AC3), you must connect your audio-digital
receiver to the coaxial output of the receiver.
Caution!
Never connect the Phono input of your stereo system
to the receiver; it may damage your stereo system.
Strictly follow instructions for connecting the
Cinch cable provided in the operating manual of your
stereo system.
Caution!
Please follow strictly the information regarding
connection in the operating manual of your audio-
digital receiver.
The coaxial cable is not included in the scope of
supply.
Your TV set need not be switched on for radio
reception.
To Next Page
Loading...
Need help?
General
