Connecting the receiver
22
Connection with the Cinch cable
To reproduce sound via your stereo equipment, connect
it with a Cinch cable to the receiver.
Connect the “AUDIO R” and “AUDIO L” sockets of the
receiver to the audio inputs of the stereo system.
Caution!
Never connect the Phono input of your stereo system
to the receiver; it may damage your stereo system.
Strictly follow instructions for connecting the Cinch
cable given in the operating manual of your stereo
system.
The Cinch cable is not included in the scope of
supply.
When using the digital radio function of your
receiver you do not need to switch on your TV
set. The sound output is made via the connected
stereo system. Just for selecting the radio station
you will need your TV set for better orientation.
To Next Page
Loading...
Need help?
General
