Connecting the receiver
26
Connecting the receiver to the mains supply
Caution!
Check that connections of all equipment and the
antenna are proper before connecting the receiver to
the mains.
Insert the mains plug of the receiver in the mains
socket.
Turn the mains switch to ON.
The device is in operating mode. The green LED is lit.
Insert the mains plugs of the connected equipment in
the mains socket and switch them on.
Switch on the AV channel of the TV set. If the TV set
recognizes the switching voltage emitted by the
receiver, it will switch automatically to the AV mode.
To Next Page
Loading...
Need help?
General
