Connecting the receiver
16
Connecting the receiver
Connecting the receiver to the antenna
Caution!
Remove all plastic wraps from the receiver before
connecting it to the antenna. Otherwise the receiver
can suffer damages. Danger of overheating.
Connect the receiver to the antenna by using an
antenna cable.
The antenna cable is not included in the scope of
supply.
Caution!
Connect the receiver to the mains supply only after you
have connected it to all equipment and the antenna
properly. Otherwise, the receiver can suffer damages.
The wire netting and the inner core of the coaxial cable
carry current during operation if the 5V supply voltage
is enabled.
To Next Page
Loading...
Need help?
General
