Tips & tricks/trouble shooting
52
System crash
(receiver cannot
be operated
anymore.)
Should it come to the improbable case of a
system crash, separate the receiver from the
mains supply. Connect it again after 10
seconds. With this, the problem can be solved
usually.
Please note: a software crash is not a
malfunction and no guarantee will apply. For
technical equipment (e.g. also PC, radio
network, etc.) a software crash can be solved
simply and quickly by following this procedure.
The batteries are exhausted.
Replace the batteries.
The remote
control does not
work.
The remote control is not directed properly.
Aim the remote control towards the front side
of the receiver and ensure that there is no
obstacle between the remote control and the
receiver.
Exit favorite list
Press the FAV key and the 1 key.
Password The default password is 0000.
Cannot remember
personal
password
Please contact the service hotline if you have
forgotten your personal password.
Operating manual
in additional
languages
On the website www.mysilvercrest.de this
operating manual is available for download in
additional languages.
Default value the default settings are restored if you keep the
standby key at the front side of your receiver
pressed for more than 10 seconds. Caution! By
doing this, your personal settings will get lost.
To Next Page
Loading...
Need help?
General
