Silvercrest SRH 5 C3 - Page 22

GB
│
IE
│
NI │ 19 ■
SRH 5 C3
♦ Press the VOLUME | ENTER / SCAN dial6 for approx. 2 seconds
to start the automatic station scan. The progress of the scan is shown as a
progress bar and the number of stations found is shown on the display 1.
The FM radio stations found are automatically stored in the station list on
order of increasing frequency. When the scan is finished, the first station in
the station list is automatically played.
NOTE
► An automatic station scan with station saving may overwrite an existing
station list.
Selecting stations
♦ Briefly press the TUNE+ 8 or TUNE− button 7 to select an FM radio
station from the station list.
♦ Press the VOLUME |
ENTER/SCAN dial6 to confirm the selection.
Manual station scan
♦ Briefly press the VOLUME | ENTER/SCANdial 6 to switch to the
next receivable station in ascending order.
NOTE
► The frequency of the station is shown on the display
1 and the speaker9
is switched off during station scan.
Manual station selection
♦ Press the TUNE+ 8 or TUNE− 7 button for about 2 seconds to change
the FM frequency in 0.05 MHz increments. The current FM frequency is
shown on the display
1.