19-6432-M-01 Rev 4 8
2.1 Box Contents
The Blower is supplied with:
• Two round mounting stand knobs.
• Two truss-head screws for securing the bracket (p/n 28-3328).
• One 8-pin terminal block plug for connecting to tool power
(p/n 18-2308).
• Certificate of Compliance.
In addition, the following options may be included if they have been
ordered:
• A benchtop or in-tool mounting stand.
• One of the following three power supplies:
- 120 VAC transformer (#14-1320-01)
- 230 VAC transformer (#14-1330)
- AC/DC universal power supply (#14-1322).
If you ordered an AC/DC universal power supply (#14-1322), you
will have one of the following plug adapters:
• US wall outlet adapter (p/n 18-0285)
• UK wall outlet adapter (p/n 18-0286)
• Europe wall outlet adapter (p/n 18-0287)
• Australia/China wall outlet adapter (p/n 18-0288).
To Next Page
Loading...
