19-6432-M-01 Rev 4 20
2.8 Alarms
In the event of an alarm, the red LED on the front of the Model
6432e Blower will light. An alarm indicates that the Blower’s internal
high voltage power circuitry that drives the emitter points is not
functioning correctly. Causes may include low or incorrect input
voltage, or a compromised internal part.
The Blower’s alarm is not a maintenance alert. In most cases,
service will be required.
Before contacting Simco-Ion for service, make sure that the Blower
is receiving proper input voltage per specifications.
Caution:
There are no user serviceable parts inside this Blower. Any
unauthorized service will void the warranty and may result in
additional repair charges.
Achtung:
Es gibt keine vom Anwender zu wartenden Teile in diesem
Blower. Nicht autorisierter Service führt zum Erlöschen der
Garantie und kann zu zusätzlichen Reparaturkosten führen.
To Next Page
Loading...
