19-6432-M-01 Rev 4 2
1.1 Point of Use Ionizing Blower Model
6432e
The Point of Use Ionizing Blower Model 6432e controls static
discharge in areas where static build-up can cause contamination,
ESD, material-handling problems, or microprocessor lock-up. The
internal emitter points are electrostatically shielded to eliminate
field-induced charging. Steady-state DC ion emission provides fast
discharge with low airflow.
The Model 6432e features a red alarm indicator LED on the front of
the Blower. See 2.8 Alarms section for a discussion of the alarm
function. The eight-pin terminal strip provides a 4-20 mA current
loop and relay output connection to your facility monitoring system
(FMS) in addition to the 24 VDC input connection.
Figure 1. Front of the Model 6432e Blower
To Next Page
Loading...
