19-6432-M-01 Rev 4 22
3.1 Maintenance Requirements
The performance of the Blower is designed to be maintained
primarily by the internal auto-balance circuitry. Occasional cleaning
of the case and emitter points is the only routine maintenance
required. No readjustment of the ionizer is required after cleaning.
The Blower can be easily removed from the universal bracket by
unscrewing the side knobs.
Recommended cleaning materials:
• Cleanroom-compatible cleaning cloths (polyester cloth is
recommended)
• Cleanroom-compatible swabs
• Cleaning solution of 50% IPA (electronic-grade isopropanol)/
50% de-ionized water
To Next Page
Loading...
