SimCom SIM7800 Series - AT+CFTPSLOGOUT Logout FTP(S) Server

Smart Machine Smart Decision
SIM7500_SIM7600_SIM7800 Series_FTPS_AT Command Manual 6 / 29
b) If parameter format is not right or other error not related with
network occurs:
ERROR
c)if any other network related error occurs:
OK
+CFTPSLOGIN: <errcode>
Defined Values
<host>
Host address, string type, maximum length is 256
<port>
The host listening port for FTP(S), the range is from 1 to 65535
<username>
FTP(S) user name, string type, maximum length is 256
<password>
The user password, string type, maximum length is 256
<server_type>
FTP(S)server type,numeric,from0-3,default is 3
0 – FTP server.
1 – Explicit FTPS server with AUTH SSL.
2 – Explicit FTPS server with AUTH TLS.
3 – Implicit FTPS server.
<errcode>
The result code of the FTP/FTPS login. 0 is success. Others are
failure, please refer to chapter 4.
2.4 AT+CFTPSLOGOUT Logout FTP(S) server
AT+CFTPSLOGOUT is used to logout a FTP(S) sever, make sure you login a FTP(S) sever before you execute
AT+CFTPSLOGOUT command.
AT+CFTPSLOGOUT Logout a FTP(S) server
Test Command
AT+CFTPSLOGOUT=?
Response
OK
Execute Command
AT+CFTPSLOGOUT
Response
a)If logout successfully:
OK
+CFTPSLOGOUT: 0
b)if failed:
OK
+CFTPSLOGOUT: <errcode>
Defined Values
<errcode>
The result code of the FTP/FTPS logout. 0 is success. Others are
failure, please refer to chapter 4.