Need help?Do you have a question about the SimCom SIM7000G and is the answer not in the manual?
General| Category | Control Unit |
|---|---|
| Operating Temperature | -40°C to +85°C |
| Dimensions | 24mm x 24mm x 2.6mm |
| GNSS | GPS, GLONASS, BeiDou |
| LTE Category | Cat-M1 |
| Interface | UART, GPIO |
| Power Supply | 3.4V - 4.2V |
| Certifications | CE, FCC, GCF |
| Module Type | LTE Cat-M1/NB-IoT/EGPRS Module |
Details the SIM7000 series, supported technologies, and physical dimensions.
Lists the key hardware interfaces of the SIM7000G module.
Visual representation of the SIM7000G module's internal components and connections.
Summarizes the general features and specifications of the SIM7000G.
Provides a high-level view of the SIM7000G's pin layout.
Detailed explanation of each pin's function and characteristics.
Presents package outline drawings and dimensions of the SIM7000.
Recommended PCB footprint for mounting the SIM7000 module.
Details VBAT input, voltage, and current requirements for stable SIM7000G operation.
Covers module power on/off, reset functions, and associated timing sequences.
Describes UART, USB, and SIM interfaces, including design guides and characteristics.
Explains PCM for audio and I2C for data communication, including formats and timing.
Covers network status, ADC, and LDO outputs for system monitoring and control.
Details transmission power, operating frequencies, and receive sensitivity for LTE CAT-M1.
Recommendations for designing and connecting antennas for optimal RF performance.
Technical data for GNSS operation, including sensitivity and application guidance.
Defines the extreme electrical limits for SIM7000G pins to prevent damage.
Specifies the normal operating voltage and current parameters for the module.
Details various operational modes, temperature limits, and sleep functionality.
Outlines current draw in various modes and provides ESD handling precautions.
Shows top/bottom views and explains label information for identification.
Covers reflow profiles, moisture sensitivity, and stencil foil design for manufacturing.
Details tray packaging, module count per tray, and carton dimensions.
Provides schematic diagrams for hardware implementation and integration.
Lists relevant standards and documents for further technical details.
To Next Page
