Smart Machine Smart Decision
SIM7000 _Hardware Design _V1.00 2017-05-23
Compliance Information
FCC Compliance Statement: This device complies the FCC Rules . Operation is subject to the
following two conditions: 1. This device may not cause harmful interference, and 2. This device
must accept any interference received, including interference that may cause undesired operation.
This device must accept any interference received, including interference that may cause undesired
operation. Product that is a radio transmitter is labeled with FCC ID.
FCC Caution:
(1)Exposure to Radio Frequency Radiation. This equipment must be installed and operated in
accordance with provided instructions and the antenna(s) used for this transmitter must be installed
to provide a separation distance of at least 20 cm from all persons and must not be collocated or
operating in conjunction with any other antenna or transmitter. End-users and installers must be
provided with antenna installation instructions and transmitter operating conditions for satisfying
RF exposure compliance.
(2) Any changes or modifications not expressly approved by the grantee of this device could void
the user's authority to operate the equipment.
(3) This Transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
(4) Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user authority to operate the equipment.
(5) the modules FCC ID is not visible when installed in the host, or
(6) if the host is marketed so that end users do not have straight forward commonly used methods
for access to remove the module so that the FCC ID of the module is visible; then an additional
permanent label referring to the enclosed module: Contains Transmitter Module FCC ID: 2AJYU-
SIM7000G or Contains FCC ID: 2AJYU-SIM7000G must be used.
This product is suitable for collocation internal and external antenna.Gain the scope of the
reference is as follows:
Frequency Band Antenna Gain reference (dBi)
GSM 850 ≤6.0
GSM 1900 ≤10.0
NB-IOT Band2 ≤10.0
NB-IOT Band5 ≤6.0
NB-IOT Band12 ≤6.0
NB-IOT Band13 ≤6.0
NB-IOT Band17 ≤6.0
NB-IOT Band26 ≤6.0
CAT-M1 Band2 ≤10.0
CAT-M1 Band4 ≤10.0
CAT-M1 Band5 ≤6.0
CAT-M1 Band12 ≤6.0
CAT-M1 Band13 ≤6.0
CAT-M1 Band26 ≤6.0
To Next Page
Loading...
Need help?
General
