SimCom SIM7800 Series At Command Manual

Smart Machine Smart Decision
SIM7500_SIM7600_SIM7800 Series_FTPS_AT Command Manual 7 / 29
2.5 AT+CFTPSMKD Create a new directory on FTP(S) server
AT+CFTPSMKD is used to create a new directory on a FTP(S) server. Please make sure login to the FTP(S)
server successfully before delete a directory.
AT+CFTPSMKD Create a new directory on FTP(S) server
Test Command
AT+CFTPSMKD=?
Response
+CFTPSMKD: "DIR"
OK
Execute Command
AT+CFTPSMKD=”<dir>”
Response
a)if create directory successfully:
OK
+CFTPSMKDIR: 0
b) if failed:
OK
+CFTPSMKDIR: <errcode>
c)if parameter format or any other errors:
ERROR
Defined Values
<dir>
The directory to be created, string type, maximum length is 256.
<errcode>
The result of create directory, 0 is success, others are failure,
please refer to chapter 4
2.6 AT+CFTPSRMD Delete a directory on FTP(S) server
AT+CFTPSRMD is used to delete a directory on FTP(S) server, please make sure login to the FTP(S)server
successfully before delete a directory.
AT+CFTPSRMD Delete a directory on FTP(S) server
Execute Command
AT+CFTPSRMD=?
Response
+CFTPSRMD: "DIR"
OK
Execute Command
AT+CFTPSRMD=”<dir>”
Response
a)if delete the directory successfully：
OK
+CFTPSRMD:0
b)if delete the directory failed:

SimCom SIM7800 Series Specifications

General

Brand	SimCom
Model	SIM7800 Series
Category	Control Unit
Language	English