SimCom SIM7800 Series At Command Manual

Smart Machine Smart Decision
SIM7500_SIM7600_SIM7800 Series_FTPS_AT Command Manual 17 / 29
+CFTPSGET: DATA,<out_len><CR><LF>
…
OK
b)If the cache data is AT+CFTPSLIST and everything goes well:
+CFTPSLIST: DATA,<out_len><CR><LF>
…
OK
Defined Values
<len>
Numeric type, The bytes of data cached in FTPS module.
<out_len>
The bytes of data to output. The maximum value is 1024 for
each AT+CFTPSCACHERD calling.
2.18 AT+CFTPSABORT Abort FTP(S) operations
You can use this command abort any ftp(s) operation. If execute AT+CFTPSABORT, it will logout FTP(S) server
and deactive PDP context. Please make sure you have login to FTP(S) server before AT+CFTPSABORT.
AT+CFTPSABORT Abort FTP(S) operations
Execute Command
AT+CFTPSABORT
Response
a) if abort FTP(S) operation successfully:
OK
+CFTPSABORT: 0
b) if failed:
OK
+CFTPSABORT: <errcode>
c) if any other error occurs:
ERROR
<errcode>
The result code of abort FTP(s) operation. 0 is success, others
are failure, please refer to chapter 4
3 Example
Before all FTP(S) related operations, we should ensure the followings:

SimCom SIM7800 Series Specifications

General

Brand	SimCom
Model	SIM7800 Series
Category	Control Unit
Language	English