16
6.8 Safety devices
• The safety guards must NEVER be tampered with.
• The machine must NEVER be used without the safety guards fitted.
• Use always suitable PPE for any maintenances’ operation.
• The working tools (teeth) while working can reach an high temperature level. Before
touch the working tools (teeth) wait until they cool down and suitable protection gloves
Guard for the motor hoses - only featured on the
version with 3 hydraulic lines (pressure, return and
drain);
2- Drum inspection cover. To open the cover the
fixing bolts needs to be unscrewed. Te bolts have
retaining fastener seeger rings that will not allow to
loose the bolts when they are unscrewed. Do not
remove the bolts from the cover after it is opened.
To Next Page
Loading...
