47
16 Optionals
When fitting accessories, making adjustments and replacing parts on the accessories, always
work with the machine stopped, the parking brake engaged and the ignition key removed.
Use suitable handling and lifting equipment to avoid risks of accidents caused by manual load
handling.
16.1 Special drums
Drums for specific jobs can be custom-built.
Multiteeth version
for surface
finishing or
roughing; can be
used to remove
road markings.
a variety of widths
Drum with holes
for pins for
positioning tool
holders.
There are a range of different drum widths available offering either standard or increased work
depths.
N.B. The drums that allow increased work depths do not allow the work depth to be set to less than the
increase.
There are also drums available with a fine tooth pitch, which are ideal for planing concrete.
Special drums can be obtained on request for specific processing.
To Next Page
Loading...
