6
3. Symbols
The chart below outlines the symbols used in this handbook (those considered the most important).
WARNING – HAZARD: this alerts the user to situations or problems which could either
jeopardise personal safety or lead to fatal injuries.
IMPORTANT: this alerts the user to situations or problems linked to machine efficiency rather
than safety.
“OPERATOR”: This is the appropriately trained staff member who is authorised to install,
operate, adjust, clean and transport the machine.
“MAINTENANCE ENGINEER”: This is the person(s) trained and authorised to work on the machine for
routine maintenance and the replacement of certain components.
“MACHINE”: This is the interchangeable equipment outlined in section 6.1.
“PRIME MOVER”: This is the vehicle on which the interchangeable equipment is fitted. The
abbreviation “p.m.” may also be used in this manual.
“RIGHT-HAND SIDE AND LEFT-HAND SIDE”: These are the sides of the equipment determined in relation
to the prime mover driving point.
To Next Page
Loading...
