Simex PL 4520 - Page 8

8
Always heed the warnings on the plates and transfers/stickers. Failure to do so may result in death or
serious injury. Make sure the plates and transfers/stickers are always in place and legible. If this
is not the case, affix or replace them, obtaining the materials required from the manufacturer.
4 stickers
HOOK UP POINT
FOR LIFTING PURPOSES
Code: 20941
Affixed to both sides of
the machine
Warning:
KEEP CLEAR OF THE
MACHINE (MIN. 10 m)
Code: 75572
Warning:
CUTTER DRUM ROTATING
Code: 74796