SRM9020 ~ Trunked Operating Instructions
© Comgroup Australia 2010 Page 1 TNM-U-E-0012 Issue 2a
1. INTRODUCTION
The SRM9000 Series Radios are advanced, versatile, Digital Signal Processor
(DSP) controlled, two-way mobile radios. The SRM9000 Series is available in a
number of frequency bands and versions for specific applications. This manual
describes the operation of the SRM9020 Trunked Alphanumeric Display variant.
The radio consists of a SRM9000 Transceiver Unit that may be mounted local or
remote, and a SRM9020 Alphanumeric Microphone which is designed to mount
within view and reach of the driver. A speaker connected to the radio provides
the audio interface.
The radio is software programmable and it can be customised to the operational
requirements of your particular fleet. Your Simoco representative can help in
programming your radio’s facilities to meet your present and future requirements.
This guide describes the operation of the SRM9020 facilities.
1.1 I
NSTALLATION
As the installation of your SRM9020 Radio is a technical and possibly hazardous
operation, we recommend that it is installed and set up for use by your dealer or
an authorised installer. However, if you need information regarding the correct
procedures for installation, please refer to the SRM9000 Series Installation
Instructions supplied with the radio.
To Next Page
Loading...
Need help?
General
