Simoniz S1700 - Step 8: Electrical Plug-in; Step 9: Safety Trigger Release; Step 10: System Air Purging; Step 11: Starting the Unit

10
ASSEMBLY AND OPERATING INSTRUCTIONS – continued
Step 11
Press ON ( | ) Button.
Step 10
Purge air by squeezing trigger on the gun until there is a steady stream of water.
Surface Preparation
Before starting any cleaning task it is important to inspect the area for objects which could create a
hazard. Remove objects from the work area which could be tripped over, such as toys or outdoor fur-
niture. Ensure that all doors and windows are closed tight.
OFF
(
O
)
ON
(
|
)
Fig.10
Fig.11