13
Working with detergent ensures a quick soaking
of the dirt, and allows the high-pressure water to
penetrate and remove the dirt more effectively.
Always spray detergent on a dry surface,
do not
pre-soak area. Wetting the surface first dilutes
the detergent and reduces its cleaning ability.
To apply detergents you must be operating at
low-pressure.
This provides a gentle application
of detergent, with the pressure equivalent to a
low-set garden hose. The high-pressure setting
is used for cleaning; you cannot apply detergents
when working at high-pressure. Always test
detergent in an inconspicuous area before use.
WORKING WITH DETERGENTS
Step 1
Install the adjustable wand. Set the adjustable
nozzle to the low-pressure setting by sliding
the nozzle collar out. The nozzle must be set in
the low-pressure position to apply detergents.
Step 2
Attach detergent suction tube onto detergent
lid
. Fill the detergent bottle with detergent. Screw
the lid onto the detergent bottle and attach bottle
to the pressure washer (Fig.17).
Note: You can
adjust amount of detergent by moving the deter-
gent lid tab between – and +.
Fig.16 Fig.17
Caution
Only use cleaning detergents
recommended for this pressure washer.
To Next Page
Loading...
