Turbo Power Wand
The high-pressure turbo nozzle (Fig.15) is
intended for maximum cleaning effect. Keep the
spray wand 6–8” away from the cleaning surface
at all times.
12
USING THE ACCESSORIES – continued
Adjusting The Spray
The adjustable spray nozzle can adjust from fan
to jet in the high-pressure position only. The
spray is adjusted from jet spray to fan spray by
turning the nozzle as shown in Fig.14.
Note: The pressure of the spray on the surface
you are cleaning increases as you move the
wand closer to the surface.
Fig.14
Fig.15
Caution
Jet spray adjustment is very aggressive.
Do not adjust while spraying. We recom-
mend that for most cleaning applications
a 20º spray angle should be used to avoid
damage to the surface being sprayed.
Caution
Do not try to adjust the turbo nozzle.
To Next Page
Loading...
