Simoniz VE 26 - Shutting down and Cleaning up; Taking Breaks; Warnings

11
MODEL: VE 26 / 039-8119-2
Operating Instructions
6. Operating Instructions
6.2 Shutting Down and Cleaning Up
1
Turn off water supply and disconnect the
garden hose from the water inlet on the
pressure washer.
2
Pull the trigger to release any remaining water
pressure.
3
Set the ON/OFF switch to the OFF position.
4
Unplug the power cord from the outlet.
5
Engage the safety lock on the spray gun.
1
Engage the safety lock on the
spray gun.
2
Set the ON/OFF switch to the OFF position.
3
Unplug the power cord from the outlet.
WARNING
Turn off the water supply and pull the trigger to
depressurize the device. Failure to do so might result in
personal injury due to discharge of
high-pressure water.
CAUTION
Failure to clean this product properly will cause the
detergent injection system to become clogged and
inoperable.
WARNING
Never use:
•
Bleach, chlorine products or other corrosive
chemicals
•
Liquids containing solvents (i.e., paint thinners,
gasoline, oils, etc.)
•
Tri-sodium phosphate products
•
Ammonia products
•
Acid-based products
These chemicals will harm the unit and will damage the
surface being cleaned.
6.3 Taking Breaks
If taking a five minute or longer break while using the
pressure washer:
6.4 Warnings