EasyManuals Logo

Simplex 4009 Installation Instructions

Simplex 4009
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
579-1019 Rev M
4009 IDNAC Repeater Installation Instructions
*05791019M*
Cautions, Warnings, and Regulatory Information
READ AND SAVE THESE INSTRUCTIONS Follow the instructions in this installation manual. These instructions must be followed to avoid damage to
this product and associated equipment. Product operation and reliability depend upon proper installation.
DO NOT INSTALL ANY SIMPLEX™ PRODUCT THAT APPEARS DAMAGED Upon unpacking your Simplex product, inspect the
contents of the carton for shipping damage. If damage is apparent, immediately file a claim with the carrier and notify an authorized
Simplex product supplier.
ELECTRICAL HAZARD Disconnect electrical field power when making any internal adjustments or repairs. All repairs should be
performed by a representative or an authorized agent of your local Simplex product supplier.
STATIC HAZARD Static electricity can damage components. Handle as follows:
Ground yourself before opening or installing components.
Prior to installation, keep components wrapped in anti-static material at all times.
SULFURIC ACID WARNING Battery contains sulfuric acid, which can cause severe burns to the skin and eyes and can destroy
fabric. Replace any leaking or damaged battery while wearing appropriate protective gear. If you come in contact with sulfuric acid,
immediately flush skin or eyes with water for 15 minutes and seek immediate medical attention.
Introduction
The 4009 IDNAC Repeater is a TrueAlertES Addressable device that extends the maximum wiring distance supported by the IDNAC Signaling Line
Circuit (SLC).
The IDNAC Repeater is compatible with Fire Alarm Control Panels (FACPs) that use the Extended Power Supply (EPS and EPS+).
The following lists IDNAC Repeater models:
4009-9601 120 V/240 V Platinum UL/ULC
4009-9602 120 V/240 V Red UL/ULC
4009-9601 BA 120 V/240 V Platinum UL/ULC assembled in USA.
4009-9602 BA 120 V/240 V Red UL/ULC assembled in USA
CAUTION
DISCONNECT
BEFORE
BATTER
A.C. POWER
Y AND
SERVICING
B
Fig 1: 4009 IDNAC Repeater

Other manuals for Simplex 4009

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Simplex 4009 and is the answer not in the manual?

Simplex 4009 Specifications

General IconGeneral
BrandSimplex
Model4009
CategoryExtender
LanguageEnglish

Related product manuals