Read the sections on Programming Instructions before using the PROGRAMMING SUMMARY.
SET TIME - Press TIME [3] key then [ENTER]. Enter the hours, press [ENTER]. Enter the minutes, press
[ENTER]. Press [AM] or [PM], press [ENTER]. Timing begins the instant you press [ENTER] on entering the
[AM] or [PM].
SET DATE - Press DATE [D] key then [ENTER]. Enter month, press [ENTER]. Enter day, press [ENTER].
Enter year, press [ENTER].
SET DAY - Press the DAY [4] key then [ENTER]. Press the DAY [4] key until desired day is displayed, then
press [ENTER].
SET DST DATES - Press DST [7] key then [ENTER]. Enter month for Spring DST, press [ENTER]. Enter the
desired Sunday for Spring DST, press [ENTER]. Enter month for Fall DST, press [ENTER]. Enter the desired
Sunday for Fall DST, press [ENTER].
ENTERING THE SECONDARY CLOCK MODE - Press keys [2] [0] then [ENTER]. Press any key to advance to
the desired mode, then press [ENTER].
SETTING THE MAXIMUM NUMBER OF ENTRIES PER PLAN - Press [3] [1] then [ENTER]. Enter the desired
number of entries per plan, up to 99 then press [ENTER]. Press [EXIT] after reviewing the display.
ENTERING THE BASIC PLAN PROGRAM - Press the BASIC [B] key then [ENTER]. Enter the desired plan
number, press [ENTER]. Enter the desired entry number, press [ENTER]. Press the DAY [4] key until desired
day or group of days is displayed, press [ENTER]. Enter the desired hour, press [ENTER]. Enter the desired
minute, press [ENTER]. Press [AM] or [PM], press [ENTER]. Enter the desired relays to turn ON, press
[ENTER]. The entry is now programmed and ready for the next entry. Repeat this process until entire program
is entered then press [EXIT].
ENTERING THE ANNUAL PLAN PROGRAM - Press the ANNUAL [A] key then [ENTER]. Enter the desired
Annual Plan number, press [ENTER]. Enter the desired Alternate Plan number, press [ENTER]. Enter the start
month, press [ENTER]. Enter the start day, press [ENTER]. Enter the start year, press [ENTER]. Or press [A]
to enter “XX” for the year and make the plan an Annual Repeat Plan. Enter the end month, press [ENTER].
Enter the end day, press [ENTER]. Enter the end year, press [ENTER]. Or press [A] to enter “XX” for the year
and make the plan an Annual Repeat Plan. The first Annual Plan is programmed. The menu will now advance to
the next Annual Plan. Press [ENTER] to continue programming Annual Plans or press [EXIT] to return to the
time display.
MANUAL SELECTION OF ALTERNATE PLANS - Press [2] [1] then [ENTER]. Select alternate plan (Basic Plan
1 to 9) then press [ENTER].
MANUAL OVERRIDE SWITCHES – Normal position is AUTO, which allows the program to control the selected
circuit/s. ON position latches selected circuit/s ON. OFF position latches selected circuit/s OFF.
MANUAL OPERATION - Press MANUAL [1] then [ENTER]. Enter relays to manually control then press
[ENTER]. The chosen relays will energize.
CLEARING THE ANNUAL AND BASIC PROGRAMS - Press CLEAR [C] then [ENTER]. Press ANNUAL [A] to
clear annual program or BASIC [B] to clear the basic program. Choose the sets buffer to clear.
REVIEWING BASIC PLAN PROGRAM - Press BASIC [B] key then [ENTER]. Press BASIC [B] key again
repeatedly to review each entry. Press [EXIT] when done.
27
To Next Page
Loading...
Need help?
General
