REVIEWING THE ANNUAL PLAN PROGRAM - Press ANNUAL [A] key then [ENTER]. Press ANNUAL [A] key
again repeatedly to review each Annual plan.
SETTING THE OUTPUT PULSE – Press [5] then [ENTER]. Enter a pulse length from 1 to 9. Press [ENTER].
Enter the number of the relay(s) the pulse is to be applied to. Exclude relay 2. Press [ENTER].
SETTING THE RELAY 2 PULSE – Press [5][A]. Press [ENTER]. Enter a pulse length from 1 to 9. Press
[ENTER].
28
To Next Page
Loading...
