Power Button
Filter Timer
Filter Reset
When the �ilter lifespan reaches 100%, you need to
replace the �ilter. (see page 9). After the �ilter is replaced,
press and hold the power button for 8 seconds while in
operation mode, the light on the power button will �lash
green and beep, indicating the �ilter lifespan timer has
been reset.
NOTICE: It is only possible to reset the �ilter lifespan
when the red light on the power button �lashes three
times with three beeps.
Press the power button repeatedly to cycle
through the different speed settings in
manual mode.
1 - Low fan Speed - Blue indicator light
2 - Medium fan speed - Yellow indicator light
3 - High fan speed - Red indicator light
The corresponding fan speed indicator light
will display the current fan speed.
The �ilter element lifespan is dependent on
how many hours the air puri�ier is utilized
and which mode of operation is used.
The system automatically monitors the fan
speed and operational hours; when the �ilter
lifespan reaches 100%, the red light on the
power button will �lash three times with
three beeps. It is now time to replace the �ilter.
8
To Next Page
Loading...
