Health & Safety
SimPure
®
products are designed with safety in mind. However, personnel
using these units must be familiar with any potential dangers. All safety
information detailed in this handbook should be reviewed before installing
and operating this water purification system.
This product is not a toy; please keep children away from the
water purifier or use under adult supervision. Please keep
packing materials out of children’s reach.
The system has been designed for indoor use only. Install the
System out of direct sunlight on a flat, level, dry, and secure
surface in ambient room temperature.
Do not move the system without first isolating the power supply
and draining the feed water tank.
This unit is for use with cold municipal tap water or potable well
water that has been tested safe by a certified laboratory. Never use
hot water or unknown/unsafe sources of water.
To protect against fire, electric shock and injury do not immerse
power cords, plugs, or the appliance in water or any other liquid.
In case of malfunction, remove the power plug. If any part of the
System is damaged or missing, replace the items before use.
Warnings! and Cautions! are provided; Failing to observe
the instructions could result in damage to the equipment,
associated parts, surroundings, or personal injury.
Operating Guidelines
The following table lists the operating parameters for this product.
Operating this product outside these specifications may cause system
performance issues and may even lead to personal injury and void any
warranty. Please contact SimPure
®
for further advice and support.
* TDS = Total Dissolved Solids, which is the total weight of all solids dissolved in a given
volume of water, expressed in units of mg per unit volume of water (mg/L), also referred to
as parts-per-million (ppm). With a SimPure® TDS meter, you can easily compare the system
outlet quality with your source water to help monitor the performance of the system.
To Next Page
Loading...
