Simrad CP42 User Manual

CP42/50/52 Miscellaneous menu Chapter 8
91
MENU
Call up the menu bar, and…
6,4
load the Data transfer window
Data transfer
_1_
DataCard upper drawer
- see section 8.4
_3_ DataCard lower drawer
- see section 8.4
_7_
NMEA connection
_MENU_ Exit
7
Select the NMEA connection
WARNING!
Normal NMEA communication on
selected channel will be
interrupted.
_1_ NMEA 1
_3_ NMEA 2
_MENU_
Exit
Press [1] or [3] to select the NMEA port where the PC data cable is
connected. Example:
NMEA 1 connection
_1_
Transmit WPs
_3_
Transmit routes
_7_
Receive WPs and routes
_MENU_
Exit
The normal communication via this
NMEA port is temporarily abrupted
during the time of data transfer.
Transmit WPs
1
Press [1] to start transmission of all waypoints stored in the
CP42/50/52 WP list to PC
When the transmission is completed you will receive a new info
window informing of how many waypoints were transferred.
MENU
Exit function and return to normal NMEA communication

Simrad CP42 Specifications

General

Brand	Simrad
Model	CP42
Category	GPS
Language	English