CP42/50/52 Miscellaneous menu Chapter 8
90
MENU
Press [MENU] to Exit, and reboot*
* When the system makes a ‘reboot’ (only if loading “Setup”)the
screen will turn black for a brief moment, then the system will re-start
and automatically return to the active display which was on the screen
before you made the transfer.
Load from DataCard:
DATABANK-1
Data generated by: Simrad CP42
Used internal memory: 672 bytes = 0%
Used DataCard memory: 85332 bytes = 19%
Used internal memory after operation: 85332 bytes = 19%
Date saved: 24-08-2000
Time saved: 09:26:59
Name: MR14
Data type Amount Size
Marks/waypoints: 52
[byte]
1120
Lines: 2 284
Routes: 8 6280
Targets: 3 72
Tracks: 5 75287
Setup: 1 2289
Exit Load from DataCard
8.5 Data transfer via PC interface
Data transfer to and from a route planning program on a Personal
Computer can be made via NMEA connection (Refer to Installation
manual section 11.8) by means of the standard NMEA0183 sentences
WPL and RTE.
) The data transfer on these two sentences does not include WP
symbol, color, XTE limit, etc.
MENU
ENT
To Next Page
Loading...
Need help?
General
