Simrad EQ44 - Pilot; Position Setup

Chapter 10-4 EQ44/54 SETUP menu
10.2 Pilot / Position setup
MENU
Call up the menu bar, and...
7,1
load Pilot/Position setup display
Pilot/Pos setup:
Display position as: LAT/LON
Display speed as: STW
Course and bearing as: MAGNETIC
Time: 13:43:56 Date: 14-02-2004
MENU
Exit Accept
ENT
Go to the function you wish to change
0-9
Key in new values, or...
+/-
Toggle between available values
ENT
Confirm editing
Display position as - the position can be shown in latitude/
longitude, Loran C or decca coordinates (after selecting chain from
the Miscellaneous menu). Toggle with +/-.
Display speed as - SOG Speed Over Ground or STW Speed
Through Water. Toggle with +/-.
 To receive STW information will require connection of external
instrument via the SimNet system or the NMEA port.
Course and bearing as - readings of course and bearing can be
made in either MAGNETIC or TRUE. Toggle with +/-.
Time - correct actual time and date by means of the numeric keys.