Simrad EQ44 - Setup Menu; Echosounder Setup

EQ44/54 SETUP menu Chapter 10-1
10. Setup menu
7
SETUP
STND
Echosounder setup - see section 10.1
1
Pilot/Position setup - see section 10.2
2
Speed alarm, units & language - see section 10.3
3
Interface setup - see section 10.4
4
Palette setup - see section 10.5
5
Factory settings - see section 10.6
6
QuickGuide - see section 10.7
10.1 Echosounder setup
The Echosounder setup display mainly consist of general settings,
but also applies to a specific frequency where stated. The EQXX
features single and dual transceiver transmitting at 38, 50 and 200
kHz.
MENU
Call up the menu bar, and...
7
open the SETUP menu, and...
STND
load Echosounder setup display - see display example next page.