Simrad Mercury - Mercury Controller Features and Operation; Mercury Controller Interface

5
MERCURY CONTROLLER
A
B
C
D
E
A Mercury controller – use to show/hide the controller.
B Active Trim – use to turn on/o the active trim feature to enhance vessel performance and stability.
C Cruise control – use to set a speed limiting function at higher engine RPMs.
D Troll control – use to set a speed limiting function for use at slower speeds.
E Sport exhaust – use to turn activate the sport exhaust mode on compatible Mercury engines.
¼ Note: You can start and stop cruise control or troll control directly from this panel by pressing C or D.
¼ Note: The Mercury controller and options within the controller are only visible and enabled when the
suitable hardware is congured on the vessel via the SmartCraft Connect gateway.