Simrad Mercury - Active Trim System

8
ACTIVE TRIM
Active Trim is an integrated GPS, speed-based automatic engine trim system from Mercury Marine. This
system continually adjusts engine trim based on changes in boat speed to improve performance, fuel
economy, and ease of operation.
Active Trim should be congured by your engine and/or SmartCraft Connect installer.
Engage Active Trim
Follow these steps to engage Active Trim when it is safe to do so.
A
D
B
C
1 Put the throttle into gear.
2 Select Active Trim (A).
3 Select +/- buttons (B) to change an Active Trim prole (set up by your installer).
4 Select ON (C) to engage Active Trim.
5 Select OFF (D) to disengage Active Trim.
¼ Note: Active Trim can only be engaged when the throttle is in gear.
Active Trim behavior
As the boat accelerates, the engine will trim out, and as the boat decelerates (E.g. when making a turn),
the engine will trim in.
Follow the prompts and alerts, and take necessary action where required.
¼ Note: Active Trim allows the boat operator to compensate for changes in boat load, driver preferences,
and weather conditions while maintaining full automatic control. Use the manual trim buttons at any
time to override Active Trim.