| 33
System conguration | MX610/MX612 Operator and Installation manual
To activate the Printer Output, use the procedure below:
1. Press the MENU key.
2. Turn the rotary knob to scroll down to Tool & Settings menu then press ENT.
3. Scroll to Network then press ENT.
4. Scroll down to NMEA 0183 over junction box then press ENT.
5. A list of port numbers will be shown. The MX610JB has 4 ports while the MX612JB has 12
ports.
6. Scroll to the port you want to use (i.e. Port 1) then press ENT to bring up the “- -Device con-
figuration” screen.
7. Uncheck the “CH Output” function. This will turn off any NMEA 0183 messages that may be
on.
8. Scroll to Printer Output, press ENT.
9. Click on the printing time desired (Off, 1 Min, 30 min, 1 Hr, 2 Hr or 3 Hr).
10. Select Close and press ENT.
T
T
12/24V DC
MX61xJB
12/24V DC
To Next Page
Loading...
