All turn patters, except the U-turn, have associated turn pattern
settings. Depending on the autopilot controller these turn pattern
settings can be adjusted before you start the turn or during the turn.
Turn pattern settings, MFD
Turn pattern settings, AP48
Ú
Note: Not all autopilot controllers include turn pattern steering.
Refer to your autopilot controller for more information.
C-turn (Continuous turn)
Steers the vessel in a circle.
• Turn variable:
- Rate of turn. Increasing the value makes the vessel turn a
smaller circle.
User settings | NAC™ -D Commissioning manual
25
To Next Page
Loading...
