Maintenance
Preventive maintenance
The unit does not contain any field serviceable components.
Therefore, the operator is required to perform only a very limited
amount of preventative maintenance.
Checking the connectors
The connectors should be checked by visual inspection only.
Push the connector plugs into the connector. If the connector plugs
are equipped with a lock, ensure that it is in the correct position.
Software update
You can update the software for the autopilot computer from a
display unit connected to the network.
You can check the autopilot computer's software version from the
display unit's Device list.
The latest software is available for download from the product
website on www.simrad-yachting.com.
Resetting the autopilot computer
You can reset the autopilot to factory default settings.
Reset autopilot computer, MFDs
6
Maintenance | NAC™ -D Commissioning manual
31
To Next Page
Loading...
Need help?
General
