Simulator
Introduction
The simulation feature lets you see how the unit works without being connected to sensors
or other devices.
Demo mode
In this mode the unit displays the main features of the product.
Ú
Note: Demo mode is designed for retail/showroom demonstrations.
Simulator source files
You can select which data files that are used by the simulator. It can be either pre-recorded
data files included in your device, your own recorded log files, or log files on a mass storage
device connected to the unit.
Advanced simulator settings
The advanced simulator settings allows for manually controlling the simulator.
GPS source
Selects where the GPS data is generated from.
Speed and Course
Used for manually entering values when GPS source is set to Simulated course. Otherwise,
GPS data including speed and course come from the selected source file.
5
Simulator | R5000 Commissioning manual
37
To Next Page
Loading...
Need help?
General
