Simrad RS10U User Manual

25
Simrad RS10 Operation and Installation Manual
It is not possible to have both ATIS ON (on) and DSC ON (on) simultaneously. When you enable one, the
other will turn OFF (o). If DSC and ATIS are both OFF (o ), DSC will have to be switched ON (on) for
normal DSC operation.
There are two annunciators in the screen to show you the current mode: if the DSC annunciator is shown,
DSC is operational. If the ATIS annunciator is shown, ATIS is operational.
4-7 Response Type to LL Polling Calls (LL REPLY)
You can set up the radio to respond to an LL polling request in one of three ways:
AUTO automatically replies to any incoming LL polling requests from any of your buddies.
MANUAL choose whether to reply automatically or manually to any incoming buddy polling requests.
OFF ignores all incoming buddy LL polling requests.
1. Select DSC SETUP, then LL REPLY.
2. Select your response and press ENT to conrm
and return to the menu.
DSC SETUP
INDIV REPLY
DSC FUNC
> LL REPLY
LL REPLY
> AUTO
MANUAL
OFF

Simrad RS10U Specifications

General

Brand	Simrad
Model	RS10U
Category	Radio
Language	English