Simrad RS10U User Manual

31
Simrad RS10 Operation and Installation Manual
5-3-2 Receiving an Individual Call (INDIV)
1. When you receive notication of an INDIV
call, press any key to cancel the alert. The
radio automatically selects the channel
designated in the incoming call. INDIV
calls are almost always Routine priority.
If the radio recognises the user MMSI as one of your buddies, the buddy’s name is displayed in
place of the user MMSI.
2. The RS10U responds automatically but the RS10E prompts you to press ENT to acknowledge the
incoming call.
3. The caller should respond to your acknowledgement by making voice contact on the designated
channel. If this does not happen, you can press PTT to initiate voice contact instead.
The call data is stored in the Call Log (see Section 5-2-7).
5-3-3 Receiving a Group Call (GROUP)
1. When you receive notication of a GROUP call, press any key to cancel
the alert. The radio automatically selects the channel designated in the
incoming call.
The priority level is always routine, and the group is identied on the
screen. The group will be one of the three groups of frequently called
people that you set up earlier (see Section 4-3).
2. You do not need to send an acknowledgement. If desired, press PTT to initiate voice contact on the
designated channel.
The call data is stored in the Call Log (see Section 5-2-7).
5-3-4 Receiving a Geographic Call (GEOGRAPH)
A geographic call is received by vessels within a specic geographic
boundary area.
1. When you receive notication of a GEOGRAPH call, press any key to
cancel the alert. The radio automatically selects the channel designated
in the incoming call.
The time and the user MMSI or name are displayed on the screen. If the radio recognises the user
MMSI as one of your buddies, the buddy’s name is displayed in place of the user MMSI.
2. Monitor the working channel for an announcement from the calling vessel.
5-3-5 Receiving a Polled Position Call (POSITION)
1. When you receive GPS position data from a buddy in response to your
LL request (see Section 5-2-9), you are recommended to make a written
note of the position, especially if it is a good shing position.
If enhanced LL position information is available from your buddy, this is
shown on the screen until the screen display changes.
RCV: INDIV
RS10
ENTER –> ACK
ESC –> EXIT
INDIV ACK
RS10
PRESS PTT
ESC –> EXIT
RCV: GROUP
GP: RD GROUP
RS10
ROUTINE
RCV: GEOGRAPH
RS10
10:34 UTC
ESC –> EXIT
RCV: POSITION
SAM
82º50.003'N
27º45.543'W

Simrad RS10U Specifications

General

Brand	Simrad
Model	RS10U
Category	Radio
Language	English