EasyManuals Logo

Simrad RS10U User Manual

Simrad RS10U
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #53 background imageLoading...
Page #53 background image
52
Simrad RS10 Operation and Installation Manual
Explanation of specific footnotes
In the countries mentioned under 2, it is strictly prohibited to use this channel.a.
This channel is not allowed to be used between Rhine km 150 and km 350.b.
In the Netherlands, this channel is used by for its on-scene communi cations during c.
safetyoperationsontheNorthSea,IJsselmeer,Waddenzee,Ooster-andWester-
schelde.
This channel may also be used for piloting, mooring, tugging and for other nautical d.
purposes.
This channel is the rst ship-to-ship channel, unless the competent authority has e.
designated an other channel.
In the countries mentioned under 2, it is allowed that the output power is set to a value
between6and25Wuntil1January2005.
In the countries mentioned under 2, this channel is used for service category ship-to-f.
port authorities.
In the Netherlands, this channel is used by its national coastgu ard for communicati ons g.
during oil pollution operations on the North Sea and for safety messages for the North
Sea,Waddenzee,IJsselmeer,Ooster-andWesterschelde.
This channel may be used only for service category on-boardon board h.
communications.
This channel may be used only for communications between sea going vessels and i.
participating land stations in case of distress and safety communica ti ons within the
maritime sea-areas. In the countries mentioned under 2, this channel may be used
only for distress, safety and calling.
The output power shall be reduced automatically to a value between 0.5 and 1 W.j.
This channel may be used for communications with a social charac ter.k.
In the Netherlands and Belgium, this channel may be used for trans mit ting mes sages l.
concerning bunkering and victualling. The output power has to be reduced manually
to a value between 0.5 and- 1 W.
This channel may also be used for public correspondence. m.
This channel will be used for an automatic ship identi cation and surveillance sys tem n.
(AIS) capable of providing worldw ide operating on seas and Inland Waterways.
The availability of this channel is on a voluntary basis. All existing equipment shall be o.
capable to of operating on this channel within a ten-year period after the entry into
force of this Arrangement.
After permission of the competent authority, this channel may be used only for spe cial p.
events on a temporary basis.
In the Czech Republic this channel is used for service category nautical information.q.
In the Czech Republic this channel is used for service category ship-to-port authorities.r.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Simrad RS10U and is the answer not in the manual?

Simrad RS10U Specifications

General IconGeneral
BrandSimrad
ModelRS10U
CategoryRadio
LanguageEnglish

Related product manuals