Simrad RS81 User Manual

Instruction manual
27
E04572
for 2 seconds. Press OK, then use the ▲ and ▼ keys to choose
the desired channel and press O
K to add the channel to the
memory scan, or to delete a previously selected channel (the
display will show “ENABLED” for each selected channel).
Use the above procedure to select/deselect further channels, or
press the O
N/C key to return to the main scanning mode.
NOTE North American users: only one Weather channel can be added
to the Memory scan, if another one is selected, it will override
the existing channel. The Weather channel will not be scanned
as part of the Memory scan sequence, but used by the Weather
Watch function instead (cf. section 5.1).
4.1.5 Memory scan clear
Memory scan clear will remove all channels previously includ-
ed in the Memory scan.
Press O
K
to access the scanning submenu and use the ▲ and ▼
keys to select “MEM CLEAR” (Fig 4.3). Press OK to reset all the
inhibited channels. The display will show “CLEARING” for 2
seconds.
Use the
▲ and ▼ keys to choose another option, or press ON/C
to return to the main menu.
4.1.6 Memory scan show
This function displays all channels selected for Memory scan.
Press O
K to access the Scanning submenu and use the ▲ and ▼
keys to select “MEM SHOW”. The display will sequentially
show all channels selected for memory scan.
To exit this submenu press O
K, or use the ▲ and ▼ keys to
choose another option.
4.1.7 Scan dwell time
This function is used to select the length of time the RS81
remains on a channel after it has locked onto it during either
the All scan, or Memory scan function.
From the Scanning menu press O
K to access the submenus and
use the
▲ and ▼ keys to select “DWELL”. There are 11 levels of
dwell time from 0–10 (seconds).
MEM CLEAR
B
B
Fig 4.3 - Selecting channel for memory scan

Simrad RS81 Specifications

General

Brand	Simrad
Model	RS81
Category	Radio
Language	English