Instruction manual
29
E04572
To enter the nine-digit MMSI number, use the ▲ and ▼ keys to
scroll and select the number required. Use the V
OL and SQ
keys to correct any errors and press OK when entry is complet-
ed. The radio will now display “CONFIRM” and the MMSI
number must be re-entered. If the two numbers do not match,
the above procedure must be repeated.
NOTE The MMSI number will not be accepted, unless all nine digits
have been entered; the suffix “0” is automatically inserted by
the radio.
CAUTION The MMSI number can only be entered once and cannot be edit-
ed by the user. Should it become necessary to change the MMSI
number (e.g. if the radio is being moved to another boat), the
radio must be sent to an authorised Simrad service agent for
reprogramming.
Press O
N/C to return to the Numbers menu.
4.2.2 ATIS number
NOTE This section applies only to radios used in countries where the
ATIS system is in operation (Benelux and the Rhine/Danube
waterways). This option will only appear on ATIS-equipped
radios (see also section 1.5).
From the Numbers menu select “ATIS NO” – the display will
show the ATIS number, unless the number has not been
entered yet, in which case the display will show dashes only,
with a flashing dash indicating the cursor position (“- - -”).
Enter the nine-digit ATIS number using the
▲ and ▼ keys and
the V
OL and SQ keys to correct any errors.
Press O
K when entry is completed and re-enter the number
when prompted by the radio (“CONFIRM”, Fig 4.6, p. 30). If the
two numbers do not match, the procedure must be repeated.
i
1234 - - - - -
INT
16
Fig 4.5 - Entering the MMSI number
To Next Page
Loading...
Need help?
General
