Instruction manual
45
E04572
The default setting for the User channel is 16 (please refer to
section 8.3.1 for details on how to set the User channel).
7.3.1 Channel sets
In addition to the standard international channels, the RS82 can
also be programmed with regional auxiliary channels, such as
the Marina channels M and M2 in the UK, the USA Weather
channels and the Fishing or Leisure channels in Scandinavia.
To display the channel sets available, press S
HIFT followed by
1W (C
H SET). Repeated pressing of the 1W key while still in
Shift mode will scroll through the available channel sets. When
the required channel set is displayed, enter the channel number
using the numeric keypad – e.g. “2” for M2 (Fig 7.3).
The pre-selected User channel can be directly selected by press-
ing the U
SER key. The display will show “U” next to the chan-
nel number to indicate that it is the User channel (Fig 7.2).
U
23
VOLUME 05
SQUELCH 03
INT
Fig 7.2 - User channel selected
MAR I NAAAAA
MAR I NAAAAA
INT
PR I VATE AAA
Fig 7.3 - Selecting auxiliary channel sets
(sets must be available to be displayed)
To Next Page
Loading...
Need help?
General
