Instruction Manual
45
E04819 Issue 1.0
Press OK to accept the call and automatically switch to channel
16, or O
N/C to reject the call.
Note All Ships Urgency calls always use channel 16 as the working
channel.
4.3.3 All Ships Safety call
If an All Ships Safety call is received, the radio will sound an
incoming call alarm.
The display will flash between displaying “ALL SHIPS SAFE-
TY” and the caller’s MMSI. If the caller’s MMSI is stored in
the MMSI directory (see section 5.2), the display will show the
name stored instead of the MMSI number.
Press O
K to accept the call – the display will change to “REPLY
ON CH X”, where “X” is the specified working channel, or press
O
N/C to reject the call.
Press O
K again to automatically switch to the working channel.
4.3.4 All Ships Urgency call
If an All Ships Urgency call is received, the radio will sound an
incoming call alarm.
The display will flash between displaying “ALL SHIPS UR-
GENCY” and the caller’s MMSI. If the caller’s MMSI is stored
in the MMSI directory (see section 5.2), the display will show
the name stored instead of the MMSI number (Fig 4.13).
10
ALL SHIPSSS
URGENCY9 9
INT
FROMPRAY 0
SEASPRAY 0
Fig 4.13 - Incoming All Ships Urgency call
To Next Page
Loading...
Need help?
General
